|
DataMuseum.dkPresents historical artifacts from the history of: Rational R1000/400 |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about Rational R1000/400 Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 49699 (0xc223)
Types: TextFile
Notes: R1k Text-file segment
└─⟦8527c1e9b⟧ Bits:30000544 8mm tape, Rational 1000, Arrival backup of disks in PAM's R1000
└─ ⟦cfc2e13cd⟧ »Space Info Vol 2«
└─⟦7d7a569f0⟧
└─⟦this⟧
Rational_Access
________________________________________
Installation Procedure
________________________________________
________________________________________
________________________________________
________________________________________
________________________________________
Release1_0_1
________________________________________
RATIONAL\f
_________________________________________________________________
_________________________________________________________________
__________________________ Copyright 1992 by Rational
_________________________________________________________________
_________________________________________________________________
__________________________
PN 507-003288-003
This document is subject to change without notice.
Rational and R1000 are registered trademarks and Rational
Environment is a trademark of Rational.
Rational, 3320 Scott Boulevard, Santa Clara, California
95054-3197
\f
__________________________________________________
1 __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Installation
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
_________________________________________________________________
_________________________________________________________________
__________________________ Overview
_________________________________________________________________
_________________________________________________________________
__________________________
Estimated time for installation: 2 hours.
This package is composed of:
n
Rational_Access Release1_0_1 tape
n
These installation instructions
n
Rational_Access Release1_0_1 Release Information.
When installing the Rational_Access release, you can view the
upgrade process as a series of phases. These phases must be
performed in a serial manner in the order specified.
RATIONAL 8-JAN-93 Release1_0_1 1\f
n
Assessing the impact of the release on the user
community
n
Verifying prerequisites to the installation
n
Installing the release on the R1000
n
Installing the release on the Workstation
n
Cleaning up
_________________________________________________________________
_________________________________________________________________
__________________________ Assessing the Impact of the Release
_________________________________________________________________
_________________________________________________________________
__________________________
In this phase of the installation, you will assess the impact
of the release on the user community and the machine.
r 1. Users will not be able to use Rational_Access during
installation. During installation the Rational_Access
server will be killed and the new Rational_Access server
will be started.
r 2. Rational_Access_Commands in !Machine.Editor_Data will
be over written.
_________________________________________________________________
_________________________________________________________________
__________________________ Verifying Prerequisites to the
Installation
_________________________________________________________________
_________________________________________________________________
__________________________
In this phase of the installation, you will verify that the
prerequisites for installing this upgrade have been met. Do
not proceed with the upgrade until all prerequisites have been
fulfilled.
r 1. You have read this entire install note.
r 2. You have read the entire Release Information.
2 RATIONAL 8-JAN-93 Release1_0_1\f
Chapter 1: Installation
r 3. You have at least one of the configurations listed in
the supported configurations section below.
_________________________________________________________________
_________________________________________________________________
__________________________ Supported Configurations
_________________________________________________________________
_________________________________________________________________
__________________________
Rational_Access Release1_0_1 supports the following
configurations:
r 1. A R1000 running Environment D_12_7_3 (or later) and
r 2. A IBM RS/6000 running AIX 3.2. or
r 3. A Sun Sparc workstation running SunOS 4.1.2 with one of
the following X Window Systems:
n
MIT X11R4 with MWM
n
MIT X11R5 with MWM
n
Sun OpenWindows 2.0 (not recommended)
n
Sun OpenWindows 3.0 (not recommended)
Rational recommends MIT X11R4 or X11R5 with the Motif
Window Manager.
_________________________________________________________________
_________________________________________________________________
__________________________ Installing the release on the R1000
_________________________________________________________________
_________________________________________________________________
__________________________
In this phase of the install, you will restore the tape which
contains a release world located in
!Machine.Release.Archive.Rational_Access.Release1_0_1. This
release world contains nested archives which will then be
restored to complete the installation.
The following steps utilize the procedure Do_Step as described
in Appendix Do_Step.
RATIONAL 8-JAN-93 Release1_0_1 3\f
r 1. Load the Rational_Access Release1_0_1 tape into the
R1000's tape drive.
r 2. Log in to the Environment as user Rational, which must
be a member of group Privileged.
r 3. LOAD_TAPE [10 Minutes]
This step restores the
Rational_Access Release1_0_1 tape.
This step can be executed from any
command window. Answer the mount
request at the Operators Console.
There should be no errors.
r 4. Traverse to
!Machine.Release.Archive.Rational_Access.Release1_0_1.
r 5. INSTALL_RA [30 minutes]
This step will execute the steps
necessary to do most of the
installation on the R1000. After
each step you will be asked if you
want to continue the installation
(an answer of "QUIT" will abort the
install). Review any logs
displayed by the step before
continuing to the next step (an
entry of "..." in the log indicates
no errors). The section INSTALL_RA
contains more information about the
steps executed by this step and
possible errors. The steps may be
run individually if desired.
_________________________________________________________________
_________________________________________________________________
__________________________ Installing the workstation software
from the R1000
_________________________________________________________________
_________________________________________________________________
__________________________
Use these instructions to install Rational_Access on
workstations and fileservers from the R1000. If you prefer to
install the workstation software from the workstation, see the
section Installing the workstation software from the
workstation.
Overview
In !Machine.Release.Rational_Access.Release1_0_1 there is a
4 RATIONAL 8-JAN-93 Release1_0_1\f
Chapter 1: Installation
procedure called Workstation_Install which allows you to
install the Rational_Access software on the workstation
entirely from the R1000, that is, you do not have to log on to
the workstation to do the install.
Workstation_Install requires rsh to be available on the
workstation, if rsh is not available, use the instructions in
the Installing the workstation software from the workstation
section of this document.
Your session on the R1000 must be considered a trusted host on
the workstation when installing the workstation portion of
Rational_Access. The R1000 is considered a trusted host when
there is an entry for the R1000 and the user installing the
software on the R1000 in the .rhosts file of the user listed
in the Remote_Username parameter of Workstation_Install.
For example, if you are installing Rational_Access on a R1000
named MY_R1000], as the user RATIONAL, and you are using the
username TECHREP for the Remote_Username parameter of
Workstation_Install. The entry in the .rhosts file in the
user TECHREP's home library on the workstation would be:
my_r1000 rational
The procedure Workstation_Install will add the entry to the
.rhosts file if necessary. The .rhosts file will be restored
to its original condition when the install has completed.
Note: If Workstation_Install is aborted, the .rhosts file may
not be restored to the original version.
Workstation_Install will not modify any files or create any
directories on the workstation without approval from the
installer.
Note: Remember that UNIX is case-sensitive so be sure you are
using the right case for usernames, etc. when installing/using
Rational_Access.
r 1. On the R1000, traverse to
!Machine.Release.Rational_Access.Release1_0_1
r 2. Create a command window and execute the procedure
Workstation_Install.
Be sure that the user you supply for the Remote_Username
parameter has write access to the directory you supply in
RATIONAL 8-JAN-93 Release1_0_1 5\f
the Remote_Directory parameter. The location
/vendor/rational/Rational_Access/Rev1_0_1 is used in the
examples below, however, Rational_Access may be installed
in any location on the workstation.
For example, to transfer the files to a workstation
called "my_sun", with a username "root" and a password
"root_passwd", use the following command:
Note: When installing Rational_Access on a server, use a
directory name which is common on all machines, and make
sure the appropriate filesystems are mounted read-write.
i.e. "/vendor/rational" instead of
"/tmp_mnt/vendor/rational."
Workstation_Install (Remote_Machine => "my_sun",
Remote_Username => "root",
Remote_Password => "root_passwd",
Remote_Directory =>
"/vendor/rational/Rational_Access/rev1_0_1",
Response => "<PROFILE>");
The procedure takes about 5 minutes. If errors are displayed,
correct the problem and run Workstation_Install again.
_________________________________________________________________
_________________________________________________________________
__________________________ Installing the workstation software
from the workstation
_________________________________________________________________
_________________________________________________________________
__________________________
The Rational_Access workstation software can also be installed
by executing commands from the workstation. Use these
directions if rsh is not available on the workstation, or if
the workstation's system administrator prefers installing the
Rational_Access software from the workstation.
The lack of detail in this section is intentional. If the
installer does not know enough UNIX to use these directions,
use the directions in the Installing the workstation software
from the R1000 section of this document.
r 1. Create a directory for the Rational_Access software on
the workstation
(/vendor/rational/Rational_Access/rev1_0_1 in these
examples).
6 RATIONAL 8-JAN-93 Release1_0_1\f
Chapter 1: Installation
r 2. Traverse to the directory created in the above step.
r 3. Use ftp (in binary mode) to copy
!Machine.Release.Rational_Access.Release1_0_1.Ws_Files
from the R1000 to a file named rational.Z on the
workstation and
!Machine.Release.Rational_Access.Release1_0_1.Install_
Release from the R1000 to a file named install_release on
the workstation.
The procedure
!Machine.Release.Rational_Access.Release1_0_1.
Workstation_Install can be used to create the directory
and transfer the files to the workstation. If you want
to complete the install manually, enter NO to the prompt
"Perform installation of Rational Access on workstation?"
from Workstation_Install.
The following dialog is an example of using FTP to
transfer the file Ws_Files from the R1000 to a file named
rational.Z on the workstation. The file Install_Release
must also be transferred to the workstation in a similar
manner. This example assumes a R1000 named my_r1000.
# ftp my_r1000
Connected to my_r1000.
220 Rational FTP Server version Delta
Name (my_r1000:root): operator
331 Username OK. Please enter password:
Password: -- enter password
230 User logged in, current context !USERS.OPERATOR
ftp> binary
ftp> get
(remote-file)
!Machine.Release.Rational_Access.Release1_0_1.Ws_Files
(local-file) rational.Z
200 PORT info updated
150 File status ok; connecting to 89.64.2.105, 5.35
226 Transfer is complete; Closing data connection.
local: rational.Z remote:
!Machine.Release.Rational_Access.Release1_0_1.Ws_Files
2564096 bytes received in 51 seconds (49 Kbytes/s)
ftp> quit
221 Session complete - closing connection
r 4. Install the workstation software using install_release.
install_release takes one argument which is the location
that Rational_Access will be installed on the
workstation.
# csh install_release
RATIONAL 8-JAN-93 Release1_0_1 7\f
/vendor/rational/Rational_Access/rev1_0_1
Takes about 5 minutes to complete the execution of
install_release.
_________________________________________________________________
_________________________________________________________________
__________________________ Rational Access fonts
_________________________________________________________________
_________________________________________________________________
__________________________
Rational_Access is delivered with it's own sets of fonts.
These fonts come compiled for Sun workstations running MIT X11
or OpenWindows, and IBM RS6000 workstations. Font sources are
included for other X Servers.
It is possible to use other fonts with Rational_Access. Use
the -fn and -fb options when starting Rational_Access to
change the font used. For more information about specifying
fonts used, please refer to the users guide. Using
non-Rational supplied fonts may cause things like frame
borders to not be displayed correctly.
There is a program called checkfonts in the bin directory of
Rational_Access. This utility can be used to check to see if
the Rational_Access fonts are installed on the X Server. By
default, checkfonts checks fonts for the display specified in
the environment variable DISPLAY. The -display option is used
to specify a different X display. For example, "checkfonts
-display rational:0" checks for Rational_Access font
visibility on the rational:0 display.
There is another program in the bin directory called
install_fonts. Use this program to install the
Rational_Access fonts on Sun and IBM RS6000 workstations, if
necessary. To install the fonts:
n
Traverse to the bin directory of Rational_Access.
n
Type install_fonts and press [#Return#].
n
Answer the prompts displayed by install_fonts.
If you are using a X Server other than Sun or IBM, you will
have to install the fonts on that server manually. In the
fonts directory, there is a directory called source that
8 RATIONAL 8-JAN-93 Release1_0_1\f
Chapter 1: Installation
contains the source files for the Rational_Access fonts.
These source files must be copied to the X Server and be
compiled and installed for that X Server. The commands used
to compile and install the Rational_Access fonts are different
on different X Servers, see the documentation for your X
Server for information about installing fonts on that X
Server.
_________________________________________________________________
_________________________________________________________________
__________________________ Gaining visibility to Rational_Access
_________________________________________________________________
_________________________________________________________________
__________________________
Once Rational_Access has been installed on the workstation (by
Workstation_Install or install_release) steps must be taken to
give users visibility to Rational_Access.
In the Rational_Access directory on the workstation
(/vendor/rational/Rational_Access/rev1_0_1 in the above
examples) the following items are of interest:
n
bin: This directory contains the Rational_Access
executables, the script to start Rational_Access (named
rational) and the font installation procedures.
n
fonts: This directory structure contains fonts in both
source and compiled forms.
n
man: This directory contains man page files for
Rational_Access.
n
app_defaults: This directory contains the application
defaults for Rational_Access.
n
config.csh: This script can be used to gain visibility
to Rational_Access for C shell users or C shell
equivalent users.
n
config.sh: This script can be used to gain visibility to
Rational_Access for Bourne shell users or Bourne shell
equivalent users.
At a minimum, users need visibility to the script rational in
the bin directory.
RATIONAL 8-JAN-93 Release1_0_1 9\f
Depending on how the Rational_Access fonts were installed,
users may have to take steps to gain visibility to the fonts.
If the Rational_Access fonts were installed in the default
font path, users would not have to take additional action to
gain visibility to the Rational_Access fonts.
If the Rational_Access fonts were installed in some other
location, users would have to take additional steps to gain
visibility to the Rational_Access fonts.
n
Use the xset program to add the Rational_Access fonts to
the X server's font search path. For example, if the
fonts were installed in /fonts/ra, then try the command
xset +fp /fonts/ra. The X server must be running for
this to work. This will have to be used each time the X
server is restarted.
n
Put an xset command entry for the font directory in the
user's .xinitrc file. (The name of this file also varies
from vendor to vendor.) This file contains shell commands
that are executed when the X server is started by this
user.
n
There may be other ways to add the Rational_Access fonts
to the X server. See the vendor's windowing system users
guide for more information.
If messages in the form of "X Toolkit Warning: can't
convert.." are displayed when starting Rational_Access, the X
Server can't find the Rational_Access fonts.
The rational script will attempt to gain visibility to the
application defaults.
Users may also want to modify their MANPATH environment
variable to gain visibility to the Rational_Access man pages.
A shell script called config.csh or config.sh is built by the
Rational_Access install procedure. Users can gain visibility
to Rational_Access by executing
source config.csh
or
. config.sh
10 RATIONAL 8-JAN-93 Release1_0_1\f
Chapter 1: Installation
from the Rational_Access directory. It is suggested that
users add the entries of the corresponding config file to
their initialization procedure.
_________________________________________________________________
_________________________________________________________________
__________________________ Testing the New Release
_________________________________________________________________
_________________________________________________________________
__________________________
This phase provides a minimal amount of testing. If any
errors is encountered during testing, please refer to the
Troubleshooting appendix for corrective actions.
r 1. Go to the workstation and execute rational in a shell
prompt. Make sure that there are no error or warning
messages.
r 2. Click on the entry On Key Bindings in the Help menu. A
help dialog box will be brought out. Make sure that the
text file do contain help in it.
r 3. Click on the entry On Environment in the Help menu. A
dialog box will be brought out. Type cmvc in the
Pattern: text field, and click on Filter. Make sure that
there are entries shown under Filtered Topis:.
r 4. Connect to the R1000. And try promoting a command with
the F8 key.
_________________________________________________________________
_________________________________________________________________
__________________________ Cleaning up
_________________________________________________________________
_________________________________________________________________
__________________________
In this phase, you will perform some cleanup activities.
r 1. Go to
!Machine.Release.Archive.Rational_Access.Release1_0_1.
Logs and print out the file Do_Step_Execution_Time.
Return this printout to Rational along with other
feedback from the Feedback appendix.
r 2. CLEANUP [3 minutes]
After you have confirmed that the
release has been successfully
RATIONAL 8-JAN-93 Release1_0_1 11\f
installed, this step will destroy
the release and archive libraries
for this release of
Rational_Access. If the install
must be repeated (on the R1000 or
workstation(s)) after this step is
run, the Rational_Access product
will have to be restored from tape.
Watch the output from this step for
objects that could not be
destroyed, you may want to take
additional steps to clean up these
objects. Objects to be destroyed
by this step are:
!Machine.Release.Archive.Rational_
Access
!Machine.Release.Rational_Access
r 3. On the workstation, the file rational.Z can be deleted.
The install procedure installs both the executable code
for Sun SPARC and IBM RS6000. Therefore, to save disk
space, delete unwanted executable, namely
bin/access-sparc or bin/access-rs6k. If the installation
is intended for both platforms, the previous two files
should not be deleted. Please note that the above files
are mentioned with respect to the install directory.
12 RATIONAL 8-JAN-93 Release1_0_1\f
__________________________________________________
A __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Procedure Do_Step
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
The majority of the steps which must be performed for this
installation utilize the procedure Do_Step (included as part
of the release tape and located in !Commands) to execute the
required sequence of commands which implement the step. This
procedure must always be executed from a command window in the
release library
!Machine.Release.Archive.Rational_Access.Release1_0_1
Each step which utilizes procedure Do_Step will be of the form
<STEP_NAME> [<TIME TO EXECUTE>]
<DESCRIPTION>
where <STEP_NAME> is passed as the parameter to procedure
Do_Step which performs the necessary actions to complete the
step, <TIME TO EXECUTE> is the amount of time the step takes
to execute (this may be expressed as a range, in which case
the lower values is typically the minimum, and the upper value
is an estimate of the maximum), and <DESCRIPTION> is a
description of what the step does, including any action which
you will need to manually perform. For example:
RATIONAL 8-JAN-93 Release1_0_1 13\f
FOO [5 Minutes]
This step is an example of the
format used for steps which are
executed using procedure Do_Step.
To execute step FOO, you would go
to
!Machine.Release.Archive.Rational_
Access.Release1_0_1 and in a
command window, execute:
Do_Step ("FOO");
which would result in automatic
execution of all commands required
to implement this step. If you
needed to take any manual action in
addition to executing Do_Step, it
would be noted as :
r Perform some manual check
If any errors occur for this step,
you should always fix the problem
before proceeding on to the next
step. Each step is defined by a
fragment of Ada code which is
executed by Program.Run. These
fragments are stored in the Steps
file located in the Command_Data
library of the release. In the
event you want to modify a step,
you can use the "PROMPT => <STEP>"
form when invoking Do_Step. See
the spec of procedure Do_Step
(located in !Commands) for more
detailed information.
Warning: If you interrupt the execution of Do_Step (by using
Job.Interrupt such as CONTROL-G) it is possible that certain
interactive commands executed by some steps, such as
Common.Definition, may fail with an exception and display a
message such as
Unable to read file due to Constraint_Error (Null Access)
In general, this message has no negative impact on the
execution or completion of the step, and can be ignored.
Note: When multiple steps are executed, you will be prompted
between steps with the following:
14 RATIONAL 8-JAN-93 Release1_0_1\f
Appendix A: Procedure Do_Step
Continue with <Step Name> step (Continue | Skip | Quit)?
[Continue] : [input]
Select the action to be taken, one of Continue, Skip, or Quit.
Continue (the default if PROMOTE is entered without typing
anything) results in the step <Step Name> being executed.
Skip will skip <Step Name> and prompt with the step following
<Step Name>. Quit results in termination of Do_Step without
further steps being executed.
RATIONAL 8-JAN-93 Release1_0_1 15\f
16 RATIONAL 8-JAN-93 Release1_0_1\f
__________________________________________________
B __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Troubleshooting
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Error: "Warning: translation table syntax error: Unknown
keysym name: osf..." Fix: Append the file
$ACCESSHOME/Rational_Access/XKeysymDB to the file
/usr/lib/XKeysymDB on the workstation. $ACCESSHOME is the
directory where Rational Access was installed.
Error: "X Toolkit Warning: can't convert..." when running
rational
The error means the X Server can not find the Rational_Access
fonts. Fix: If displaying on a machine other than a Sun or
IBM RS6000, most probably fonts aren't installed on that
machine or the font path has not been set correctly.
Error: "Unable to find .../access..." when running rational
Fix: Most likely the rational script has been moved to a
different place from where it was originally installed, so it
can not find the Rational_Access binaries. Or links have been
created to point to the rational script to gain visibility, in
which case the rational script gets confused as to where
Rational_Access binaries live. To solve both problems, do not
create a link or move the rational script. Instead, create a
script that calls the rational script with the whole pathname,
or change users search path to look in the Rational_Access bin
RATIONAL 8-JAN-93 Release1_0_1 17\f
directory.
Error: "No manual entry for rational" when doing man rational
Fix: The Rational_Access man pages directory has not been
added to the users environment variable MANPATH. To fix this
problem, add the Rational_Access man pages directory to
MANPATH. For example on how to set the environment variable
MANPATH, please look at one of the config files in the
Rational_Access directory.
Error: "rational: Command not found." when running rational
Fix: Rational_Access is not visible to the user's search path.
To fix this problem, add the Rational_Access bin directory to
the user's search path. For example on how to change the
user's search path, please look at one of the config files in
the Rational_Access directory.
Error: "... terminated due to unhandled exception
!Lrm.System.Nonexistent_Page_Error" when executing a key
binding or an entry from the menu.
Fix: This unhandled exception is most probably caused by not
having the Rational Access server running. To fix this
problem, promote
!Machine.Initialization.Rational.Rational_Access_User_
Interface. A workaround for not being able to use the key F8.
Promote using Ctrl-Enter.
18 RATIONAL 8-JAN-93 Release1_0_1\f
__________________________________________________
C __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Install_Rational_Access
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
The step Install_Rational_Access runs the following steps in
this order.
r 1. RELEASE_RESTORE [5 minutes]
This step restores the archives.
When completed, a filtered error
log is displayed. Examine this log
for errors; ignore errors about
switches and links.
r 2. RESTORE_NOTES [1 minute]
This step restores the
Rational_Access Release Notes into
!Machine.Release.Release_Notes.
Note: Use the "RAW" option when
printing the _Ps copy of the
release note.
r 3. INSTALL_PRODUCT [5 minutes +
Refresh_Terminal_Information]
RATIONAL 8-JAN-93 Release1_0_1 19\f
This step installs the subsystems
that make up this release. This
step will also run
Refresh_Terminal_Information if
requested to do so. Ignore the
error "cannot run - needs a
selection" when running
Refresh_Terminal_Information. When
completed, a filtered error log
will be displayed. Examine this
log for errors, there should be no
errors.
r 4. RECORD_INSTALLATION [1 minute]
This step records release
information in
!Machine.Release.Current.Products
and sets the login limit back to
unlimited logins. This is a
required step and establishes that
the release has successfully been
installed.
20 RATIONAL 8-JAN-93 Release1_0_1\f
__________________________________________________
D __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Release Contents
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
This release contains the following components on the R1000:
!Commands.Menu_Operations
!Machine.Editor_Data.Rational_Access_Commands
!Machine.Editor_Data.Rational_Access_Keys
!Machine.Editor_Data.Rational_Access_Key_Names
!Machine.Initialization.Rational.Rational_Access_User_
Interface
This release contains the following files on the workstation.
The installation of Rational_Access requires about 20 MB of
disk space. Once Rational_Access is installed, the rational.Z
file can be deleted and only 15 MB of disk space will be used.
RATIONAL 8-JAN-93 Release1_0_1 21\f
Rational_Access/Env_Help_Topics
Rational_Access/Help_Data
Rational_Access/XSun3-xmodmap
Rational_Access/Xsun4-xmodmap
app-defaults/RATIONAL
bin/access-rs6k
bin/access-sparc
bin/checkfonts
bin/install_fonts
bin/rational
fonts/source
fonts/SPARC_MIT
fonts/SPARC_NeWS
fonts/RS6000
man/man/rational.n
Note that the actual location of the workstation components is
with respect to the location at which they are installed.
22 RATIONAL 8-JAN-93 Release1_0_1\f
__________________________________________________
E __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
System Manager Checklist
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
r 1. Make a full Environment backup.
r 2. Update Daily Message indicating that Rational_Access
Release1_0_1 has been installed.
RATIONAL 8-JAN-93 Release1_0_1 23\f
24 RATIONAL 8-JAN-93 Release1_0_1\f
__________________________________________________
F __________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
Feedback
__________________________________________________
__________________________________________________
____________________
__________________________________________________
__________________________________________________
____________________
In order to help us improve our instructions and make
installations easier to do, the following form is provided to
allow you to give us feedback. Please complete and send along
with a printout of the file Do_Step_Execution_Time located in
!Machine.Release.Archive.Rational_Access.Release1_0_1.Logs to:
Rational
Atten: SMSE
3320 Scott Blvd.
Santa Clara, CA 95054-3197
Re: Rational_Access
r 1. How long did the installation take you?
On the R1000?
On the Workstation?
r 2. Did the installation proceed as described in the
instructions?
RATIONAL 8-JAN-93 Release1_0_1 25\f
r 3. What could be done to improve these (or other)
instructions/installations?
r 4. What did you like about this set of
instructions/installation?
r 5. For the Workstation part of the installation:
n
Did the Rational Tech Rep or customer System
Administrator do the install?
n
Which installation method was used? (R1000 or
workstation based)
n
Which method was used to gain visibility to the
product?
n
What did you like/dislike about the workstation
installation?
26 RATIONAL 8-JAN-93 Release1_0_1\f
Appendix F: Feedback
Table Of Contents
1 Installation 1
Overview 1
Assessing the Impact of the Release 2
Verifying Prerequisites to the Installation 2
Supported Configurations 3
Installing the release on the R1000 3
Installing the workstation software from the R1000 4
Installing the workstation software from the workstation 6
Rational Access fonts 8
Gaining visibility to Rational_Access 9
Testing the New Release 11
Cleaning up 11
Appendix A Procedure Do_Step 13
Appendix B Troubleshooting 17
Appendix C Install_Rational_Access 19
Appendix D Release Contents 21
Appendix E System Manager Checklist 23
Appendix F Feedback 25
RATIONAL 8-JAN-93 Release1_0_1 i\f
ii RATIONAL 8-JAN-93 Release1_0_1