DataMuseum.dk

Presents historical artifacts from the history of:

Rational R1000/400 DFS Tapes

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about Rational R1000/400 DFS Tapes

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦008648689⟧ ERRMESS, TextFile

    Length: 2310 (0x906)
    Types: ERRMESS, TextFile
    Names: »EMWCSP.ERRMESS«

Derivation

└─⟦9031b0687⟧ Bits:30000407 8mm tape, Rational 1000, DFS, D_12_7_3
    └─ ⟦this⟧ »EMWCSP.ERRMESS« 

TextFile

0	Some boards got a micro-address bus parity error.
	Errors detected by -> %1% %2% %3% %4% %5%
1	Every board except the sequencer got a micro-address bus parity error.
	Try reseating the sequencer board, and/or running the frus.
2	All of the CPU boards received a micro-address bus parity error.
3	The disk file image for the DECODE RAMs has bad parity.
	Try another microcode file.
4	A DECODE RAM parity error was detected at instruction %1%,
	but the DECODE RAMs are ok.
5	The SEQ board has a bad DECODE RAM chip at location %2%, with
	%3% bad bit(s) at macro instruction %1%.
	%4%.
6	The SEQ board has two bad DECODE RAM chips at locations
	%2% and %4%, with %3% and %5% bad bit(s) at macro instruction %1%.
	%6%.
7	The SEQ board has three bad DECODE RAM chips at locations
	%2%, %4%, and %6%, with %3%, %5%, and %7% bad bit(s), respectively,
	at macro instruction %1%.
	%8%.
8	The SEQ board has many bad bits at DECODE RAM instruction %1%.
	%2%.
9	The %2% board has a bad WCS bit at address %1%.
	The bad chip is at location %3% - NOTE THIS ON THE BOARD REPAIR TAG.
	%4%.
10	The %2% board has two bad WCS bits at address %1%.
	The bad chips are at locations %3% and %4% - NOTE THESE ON REPAIR TAG.
	%5%.
11	The %2% board has three bad WCS bits at address %1%.
	The bad chips are at locations %3%, %4%, and %5%.
	%6%.
12	The %2% board's WCS microword at address %1% is much different than
	what is in the microcode disk file.
	%3%.
13	The %2% board detected a WCS parity error at location %1%, but the
	WCS RAMs contain the correct data.
14	Multiple boards in the CPU detected WCS parity errors at location %1%,
	and all of them have bad parity in their WCS at this location.
	There could be a problem loading WCS.
	%2%
15	Multiple boards in the CPU detected WCS parity errors at location %1%,
	but all of them have valid data in their WCS at this location - WIERD!
16	Multiple boards in the CPU detected WCS parity errors at location %1%,
	but all of them have good parity although some have bad data in their WCS.
	%2%
17	Multiple boards in the CPU detected WCS parity errors at location %1%,
	but only some of them have bad parity in their WCS at this location.
	there could be a problem loading WCS.
	%2%
18	The disk file for this microcode has parity errors at address %1%.
	Try another microcode file.