DataMuseum.dk

Presents historical artifacts from the history of:

Rational R1000/400 DFS Tapes

This is an automatic "excavation" of a thematic subset of
artifacts from Datamuseum.dk's BitArchive.

See our Wiki for more about Rational R1000/400 DFS Tapes

Excavated with: AutoArchaeologist - Free & Open Source Software.


top - download

⟦2aba96dde⟧ ERRMESS, TextFile

    Length: 3072 (0xc00)
    Types: ERRMESS, TextFile
    Names: »EMWCSP.ERRMESS«

Derivation

└─⟦b434774df⟧ Bits:30000528 8mm tape, Rational 1000, DFS, D_12_6_5
    └─ ⟦this⟧ »EMWCSP.ERRMESS« 

TextFile

0	Some boards got a micro-address bus parity error.
	Errors detected by -> %1% %2% %3% %4% %5%
1	Every board except the sequencer got a micro-address bus parity error.
	Try reseating the sequencer board, and/or running the frus.
2	All of the cpu board received a micro-address bus parity error.
3	The disk image for the decode rams has bad parity.  Try another
	disk image.
4	A decode ram parity error was detected at instruction %1%,
	but the decode rams are ok.
5	The SEQ board has a bad decode ram chip at location %2%, with
	%3% bad bit(s) at macro instruction %1%.
	%4%.
6	The SEQ board has two bad decode ram chips at locations
	%2% and %4%, with %3% and %5% bad bit(s) at macro instruction %1%.
	%6%.
7	The SEQ board has three bad decode ram chips at locations
	%2%, %4%, and %6%, with %3%, %5%, and %7% bad bit(s), respectively,
	at macro instruction %1%.
	%8%.
8	The SEQ board has many bad bits at decode ram instruction %1%.
	%2%.
9	The %2% board has a bad wcs bit at address %1%.
	The faulty chip is at location %3%.
	%4%.
10	The %2% board has two bad wcs bits at address %1%.
	The faulty chips are at locations %3% and %4%.
	%5%.
11	The %2% board has three bad wcs bits at address %1%.
	The faulty chips are at locations %3%, %4%, and %5%.
	%6%.
12	The microcode in the wcs rams at address %1%, is much different than
	what is on the disk.
	%2%.
13	The %2% board detected a wcs parity error at location %1%, but the
	wcs rams contain the correct data.
14	Multiple boards in the cpu detected wcs parity errors at location
	%1%.  There could be a problem loading wcs.
15	Many boards in the cpu detected parity errors at location %1%.
	All of the boards have valid data in their wcs rams at this location.
	Check for alpha particles.
16	Multiple boards in the cpu detected wcs parity errors at location %1%,
	but only some of them have bad data in their wcs.
	%2%
17	Multiple boards in the cpu detected wcs parity errors at location %1%,
	but only some of them have bad data in their wcs.
	there could be a problem loading wcs.
18	The disk image for this microcode has parity errors at address %1%.
	Try another microcode image.«nul»