|
DataMuseum.dkPresents historical artifacts from the history of: Rational R1000/400 DFS Tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about Rational R1000/400 DFS Tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 2137 (0x859)
Types: ERRMESS, TextFile
Names: »EMWCSP.ERRMESS«
└─⟦24d56d853⟧ Bits:30000744 8mm tape, Rational 1000, DFS, D_12_6_5 SEQ293
└─ ⟦this⟧ »EMWCSP.ERRMESS«
0 Some boards got a micro-address bus parity error. Errors detected by -> %1% %2% %3% %4% %5% 1 Every board except the sequencer got a micro-address bus parity error. Try reseating the sequencer board, and/or running the frus. 2 All of the cpu board received a micro-address bus parity error. 3 The disk image for the decode rams has bad parity. Try another disk image. 4 A decode ram parity error was detected at instruction %1%, but the decode rams are ok. 5 The SEQ board has a bad decode ram chip at location %2%, with %3% bad bit(s) at macro instruction %1%. %4%. 6 The SEQ board has two bad decode ram chips at locations %2% and %4%, with %3% and %5% bad bit(s) at macro instruction %1%. %6%. 7 The SEQ board has three bad decode ram chips at locations %2%, %4%, and %6%, with %3%, %5%, and %7% bad bit(s), respectively, at macro instruction %1%. %8%. 8 The SEQ board has many bad bits at decode ram instruction %1%. %2%. 9 The %2% board has a bad wcs bit at address %1%. The faulty chip is at location %3%. %4%. 10 The %2% board has two bad wcs bits at address %1%. The faulty chips are at locations %3% and %4%. %5%. 11 The %2% board has three bad wcs bits at address %1%. The faulty chips are at locations %3%, %4%, and %5%. %6%. 12 The microcode in the wcs rams at address %1%, is much different than what is on the disk. %2%. 13 The %2% board detected a wcs parity error at location %1%, but the wcs rams contain the correct data. 14 Multiple boards in the cpu detected wcs parity errors at location %1%. There could be a problem loading wcs. 15 Many boards in the cpu detected parity errors at location %1%. All of the boards have valid data in their wcs rams at this location. Check for alpha particles. 16 Multiple boards in the cpu detected wcs parity errors at location %1%, but only some of them have bad data in their wcs. %2% 17 Multiple boards in the cpu detected wcs parity errors at location %1%, but only some of them have bad data in their wcs. there could be a problem loading wcs. 18 The disk image for this microcode has parity errors at address %1%. Try another microcode image.