|
DataMuseum.dkPresents historical artifacts from the history of: Rational R1000/400 DFS Tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about Rational R1000/400 DFS Tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 1024 (0x400)
Types: HLP, TextFile
Names: »TESTPAD.HLP«
└─⟦b4205821b⟧ Bits:30000743 8mm tape, Rational 1000, DFS, D_12_7_3 SEQ288
└─ ⟦this⟧ »TESTPAD.HLP«
└─⟦b434774df⟧ Bits:30000528 8mm tape, Rational 1000, DFS, D_12_6_5
└─ ⟦this⟧ »TESTPAD.HLP«
└─⟦bc1274df5⟧ Bits:30000750 8mm tape, Rational 1000, DFS backup from PAM's R1000
└─ ⟦this⟧ »TESTPAD.HLP«
This program is used to verify the connection from the IOC to the PAD.
It performs some simple interactions to the PAD to test out basic
communication. After being started, it will ask the user if VERBOSE mode
is desired. VERBOSE mode displays all dialogue with the PAD on the console.
Successful execution of TESTPAD indicates that the IOC to PAD connection
works properly. This does not check the ability of the PAD to place
calls to RATIONAL nor to answer calls placed from RATIONAL. CONFIGURE_PAD
should be run before TESTPAD. If TESTPAD fails, follow recommendations
in CONFIGURE_PAD to correct the problem. To properly place and answer X25 calls
the PAD must be correctly configured (use CONFIGURE_PAD or a direct terminal
connection to the PAD) and the IOC needs to be correctly configured (INITIOA).«nul»