|
DataMuseum.dkPresents historical artifacts from the history of: Rational R1000/400 DFS Tapes |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about Rational R1000/400 DFS Tapes Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - download
Length: 2048 (0x800)
Types: ERRMESS, TextFile
Names: »P2USEQ.ERRMESS«
└─⟦b4205821b⟧ Bits:30000743 8mm tape, Rational 1000, DFS, D_12_7_3 SEQ288
└─ ⟦this⟧ »P2USEQ.ERRMESS«
└─⟦b434774df⟧ Bits:30000528 8mm tape, Rational 1000, DFS, D_12_6_5
└─ ⟦this⟧ »P2USEQ.ERRMESS«
└─⟦bc1274df5⟧ Bits:30000750 8mm tape, Rational 1000, DFS backup from PAM's R1000
└─ ⟦this⟧ »P2USEQ.ERRMESS«
0 ILLEGAL ERROR - Something is very wrong. The microcode didn't even get far enough to start the sequencer test. 1 Something is wrong with the micro-stack. 2 Some simple conditions didn't work. 3 One of the following problems occurred : Couldn't read the lex level Couldn't read the macro_pc or the code_mux Couldn't read the return_pc The macro_pc didin't increment properly 4 The current instruction register failed. 5 The macro_pc add failed. 6 One of the following failed : Reading the control_pred register Reading the control_top register Reading the internal sequencer bus 7 Either the control_pred or the control_top register failed to load properly from the fiu bus. 8 One of the following failed : Inc or dec-ing the control_top register Reading the nve value. 9 There is some problem with the resolve rams, resolve circuitry, or the lex level validity circuitry. 10 Generated a bad address from the resolve rams. 11 One of the following failed : Save offset register Current name register 12 The ibuffer didn't properly load. 13 Dispatching with and ibuffer of all ones or zeros failed. 14 A conditional load ibuffer failed. 15 The ibuffer didn't correctly fill during a macro event. 16 One of the following failed : Tos validate Tos latch didn't latch data Dispatch didn't invalidate the tos 17 One of the following failed : Didn't take a micro event Sequencer field number event failed 18 NVE valid macro event failed. 19 NVE free macro event failed. 20 Resolve reference macro event failed. 21 Validate TOS macro event failed. 22 THIS ERROR SHOULDN'T OCCUR! 23 BREAK macro event error. 24 The SEQ diagnostics did not die at a normal halt location. This could be a problem with the sequencer board, but usually indicates that something else in the processor is not working correctly. Good Luck.«nul»