DataMuseum.dk

top - download

    Length: 2048 (0x800)
    Types: ERRMESS, TextFile
    Names: »IOA_PANICS.ERRMESS«

└─⟦b4205821b⟧ Bits:30000743 8mm tape, Rational 1000, DFS, D_12_7_3 SEQ288
    └─ ⟦this⟧ »IOA_PANICS.ERRMESS« 
└─⟦b434774df⟧ Bits:30000528 8mm tape, Rational 1000, DFS, D_12_6_5
    └─ ⟦this⟧ »IOA_PANICS.ERRMESS« 
└─⟦bc1274df5⟧ Bits:30000750 8mm tape, Rational 1000, DFS backup from PAM's R1000
    └─ ⟦this⟧ »IOA_PANICS.ERRMESS« 

TextFile

9999	These codes appear in VMACHINE.PAS and in KERNEL_DEFS as BOOT_REASON.xxx.
9999	The messages beginning with "--" are obsolete M100 messages.
00	AC power failure occured
01	DC power failure occured when AC power was OK or White Button Reset
02	--Cluster Manager interrupted by a source which had been masked out
03	--UNIBUS AC power failure
04	--UNIBUS DC power failure
05	--Cluster Manager received an interrupt from an unknown source
06	--Cluster Manager received an illegal interrupt (Timer/Counter 1)
07	Over temperature condition ignored too long
08	Operator console BREAK key
09	Illegal modem output request received
10	Attempt to start modem output with output in progress
11	--Cluster Manager stack corrupt in idle loop.
12	R1000 Halt or Machine Check detected
13	I/O Processor fault
14	--IOA SYSBUS buffer parity error
15	I/O Processor software crash
16	--SYSBUS error ignored too long
17	--Received address frame, expected data frame.  Protocol error.
18	--I/O adaptor AC power failure.
19	--IOP made spare IPC request
20	Modem input overrun detected
21	--An I/O device will not release DC_LOW on the UNIBUS
22	--The I/O adaptor cannot get NPG on the UNIBUS
23	--An I/O device will not release NPG or SSYN on the UNIBUS
24	--I/O Processor will not respond to AC_LOW on the UNIBUS
25	Operator initiated EPO
26	--The I/O processor has made an oboslete IPC request
27	--UNIBUS interrupt timeout
28	--UNIBUS I/O timeout
29	--Nested SYSBUS interface error
30	Temperature returned to acceptable limit.
31	Operator console BREAK key (to boot options menu)
«nul»