|
DataMuseum.dkPresents historical artifacts from the history of: CP/M |
This is an automatic "excavation" of a thematic subset of
See our Wiki for more about CP/M Excavated with: AutoArchaeologist - Free & Open Source Software. |
top - metrics - download
Length: 1408 (0x580)
Types: RcTekst, TextFile
Names: »99109717.WP«
└─⟦dedaa6eab⟧ Bits:30005866/disk1.imd Dokumenter i RcTekst format (RCSL 99-1-*)
└─⟦this⟧ »99109717.WP«
╱04002d4e0a0006000000000201413140000000000000000000000000000000000000000000000000050f19232d37414b555f69737d8791ff04╱ ┆b0┆┆a1┆┆e1┆ ┆a1┆┆b0┆TF305 INSTALLATION GUIDE↲ ↲ TF305 consists of a CTA501 and a KIT505. The KIT505 contains a ↓ 5 pole male socket, 2 spacers and 4 screws.↲ ↲ The 3 pole male socket on the COI503 is remove and the 5 pole ↓ socket is installed. The two wires from the COI503 are soldered ↓ on pin 1 and 3.↲ ↲ Now the CTA501 is mounted on top of the COI503 by inserting the ↓ 50 pin female connector into the 50 pin male connector on the ↓ COI503, and then fasten it by the spacers and screws.↲ ↲ ┆b0┆┆a1┆Test of CTA501 and CIRCUIT II:↲ ↲ The tty-emulator (ver. 4.0) is loaded, a secondary address is ↓ chosen, and communication via CIRCUIT II is selected. This is all ↓ done in SET UP mode.↲ ↲ Then by pressing the return button the RC3900 will answer with ↓ "login:", writing "who" will make the RC3900 answer with ↓ information about actual tty number.↲ ↲ Test of CIRCUIT II is done by test of each wall receptacle, this ↓ is done by connecting a terminal to the receptacle and then carry ↓ out the test of CTA501 as mentioned above.↲ ↲ When this has been done for all wall receptacles the test is ↓ finished.↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ↲ ┆05┆RCSL 99-1 09717↲ ┆1a┆┆1a┆r all wall receptacles the test is ↓ finished.↲ ↲ ↓ ┆1a┆Å^_`abcdefghijklmnopqrstuvwxyzæøåü ┆00┆┆01┆┆02┆┆03┆ ╱0405060708090a0b0c0d0e0f101112131415╱
B▶03◀▶06◀N▶04◀-N ▶06◀▶02◀▶01◀A1@▶05◀▶0f◀▶19◀#-7AKU_iså▶87◀▶91◀▶ff◀▶04◀▶b0◀▶a1◀▶e1◀ ▶a1◀▶b0◀TF305 INSTALLATION GUIDE TF305 consists of a CTA501 and a KIT505. The KIT505 contains a 5 pole male socket, 2 spacers and 4 screws. The 3 pole male socket on the COI503 is remove and the 5 pole socket is installed. The two wires from the COI503 are soldered on pin 1 and 3. Now the CTA501 is mounted on top of the COI503 by inserting the 50 pin female connector into the 50 pin male connector on the COI503, and then fasten it by the spacers and screws. ▶b0◀▶a1◀Test of CTA501 and CIRCUIT II: The tty-emulator (ver. 4.0) is loaded, a secondary address is chosen, and communication via CIRCUIT II is selected. This is all done in SET UP mode. Then by pressing the return button the RC3900 will answer with "login:", writing "who" will make the RC3900 answer with information about actual tty number. Test of CIRCUIT II is done by test of each wall receptacle, this is done by connecting a terminal to the receptacle and then carry out the test of CTA501 as mentioned above. When this has been done for all wall receptacles the test is finished. ▶05◀RCSL 99-1 09717 «eof»